Your Cart

2021-2022 Ford Bronco Heat Extractor Hood

2021-2022 Ford Bronco Heat Extractor Hood, hand-laid in the USA. Our fiberglass hood comes standard in semi-gloss white. Bolt-on installation.

Questions? Ask a specialist:
714-695-8400 Chat now Request a callback

Our aftermarket Ford Hood for 2021-2022 Ford Broncos are handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Bronco fiberglass hood is made specifically for your model and year and designed for a seamless transition between the factory panels and our aftermarket body panels. This Bronco hood are is perfect match with our 2021 Ford Bronco Sasquatch Flares . Carbon Finish Options are in the vent section only. 

  • Heat-extractor hood
  • Fiberglass hood is hand-laid in America to ensure quality
  • Molded specifically to replace Sierra hood
  • Designed to be long-lasting even during the toughest rides and climates
  • Made in the USA
  • Comes standard in semi-gloss white
  • Part Number: AFC 178 (Fiberglass), AFC 178-CFV (Carbon Fiber Vents), + AFC 178-FCFV (Forged Carbon Fiber Vents) 

Ford Bronco
2021 - 2022

INSTALLATION INSTRUCTIONS - Hood

All of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.

Tools required for most install:

Socket set

Step 1: Open stock hood and remove bolts holding the hood down.

Step 2: Remove stock hood from vehicle. 

Step 3: Test fit our aftermarket hood by resting it on the hinge plates. Align it on each side to have appropriate lines. Keep in mind that the hood will sit high if it is not bolted down. 

Step 4: Open the hood, tighten the bolts on the hinge plates to fasten the hood down and close the hood.

Step 5: After closing the hood, it may require to be adjusted to get appropriate lines. Start by opening the hood to loosen the back hinge plate bolts and close the hood. Pull the hood in the direction you would like (To help make the body lines consistent from driver to passenger side). Slightly open the hood (Make sure to not move it otherwise you will need to restart this step) and tighten the back hinge plate bolts. 

Step 6: Repeat step 5 with the front hinge plate bolts to adjust and get the correct body lines from driver to passenger side. 

You will need to be patient to get a good fit. If the hood sits too low or too high in the front, you can adjust it by turning up or down the rubber height adjuster at the front of the hood located in the core support, or hood. If you need to adjust the back of the hood then loosen the three bolts that are holding the hinge plate to the chassis and push the hinge plate mechanism down and tighten the bolts. This will pull the back of the hood down to align with the fenders. 

 

These instructions are useful for all hoods sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.

Thank you for purchasing our product(s). We hope you are satisfied with the final result.

What is the normal lead-time?
We do our best to have as much inventory as possible. However, if they are not in stock, then our lead-times are normally 1-4 weeks from order date. Please contact us through live-chat, email, or phone to check inventory and current lead-times.

How much is shipping?
All our products are shipped through LTL Freight carriers. Shipping prices are calculated in the checkout area. Our products can get expensive to ship because we ship all our products with premium LTL Freight carriers to ensure they are not damaged (All orders are insured incase of potential shipping damages). Other factors that control the shipping cost are the size of the package, weight, overall destination, and nature of the product (Fiberglass), which all play a large role in shipping costs. To help cut down the shipping cost, ship to a commercial address.

Do you ship internationally?
Yes, we do ship internationally. All international orders must be placed via email (sales@advfiberglass.com). Please send over exact desired product(s) and a full shipping address for an accurate total.

What are the panels made out of?
The panels are made from fiberglass (or carbon fiber if requested at an additional cost). We use a proprietary blend of polyester resin which is paired with our fiberglass mat and cloth. This combination of resin and fabric provides the strength and flexibility to make our body panels a superior product.

What is Flare/Rise?
Flare refers to how much wider per side the panel is. Rise refers to how much taller the wheel well is.

What color do the products come?
Products come semi-gloss white unless requested in a specific gelcoat color. We do not offer color matching services. All gelcoat colors are generic colors and will not be an exact color match. Any body shop in your local area can color match our products.

Do you have a warranty?
We do not offer warranty on our products because of the nature of the industry (Off-road). We do not know how the end user will push and test our products. The brand is not liable for any damages or injury as a result of the use of its products. Rest assured, we are known to provide the strongest and best fitting part in the industry.

What is your Refund/Return/Cancellation Policy?
Advanced Fiberglass Concepts customer guarantee is that you can return your item within 30 days (20 business days) of receipt as long as it is returned in the original packaging and you pay for all shipping charges; original shipping fees are non-refundable. Products are non-refundable if mounted or altered in any way. Extra fees may be incurred for proper fitment and finish. Refunds will not be issued due to minor fitment or finish issues. All refunds are processed in 30 days (20 business days) after the order is returned. All orders have a 35% restocking/cancellation fee. All order(s) will be issued a restocking fee if the product(s) have begun production. No refunds, returns, or exchanges on wire transfers, rush orders, sale pricing, deposits, custom orders; carbon fiber, colored gel coat, and more. For all installs, we are not responsible for damages/malfunctions on aftermarket parts (Such as headlights, bumpers, and much more).

Manufacturing Art

The Facility

Design

Manufacturing

BE UNIQUE, STAND OUT

Don’t build a boring looking rig, add some ADV and turn heads everywhere you go. Reinvent the term: “Neck-breaker build.”

ENGINEERED FOR STRENGTH

Be confident knowing that ADV will get you through your next adventure, whether that is a trip to the desert, mountains, or to crawl over that curb at the mall.

PEOPLE LOVE US

And the feelings are mutual!
Always going the extra mile to provide exceptional service, building a good customer experience doesn’t happen by accident, it happens by design.

Customer Reviews
5.0 Based on 128 Reviews
5 ★
100% 
128
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    04/27/2022

    Buy with confidence ADV Fiberglass is the best.

    Advanced Fiberglass Concepts is definitely the leader in fiberglass hoods and fenders. We installed and hood and fender package on a new Ford Bronco and couldn’t be happier with the fitment and finish of the package. Their packaging is top notch and we’re very attentive when we had some installation questions. Buy with confidence ADV Fiberglass is the best.

    KF
    Ken Farley, Jr.
    United States United States
    04/20/2022

    Great products

    Ordered front fenders and rear quarters for my 22 Bronco and they showed up in great shape in a timely manner. Very responsive when I called getting updates and for help with installing them. Thanks for great products and the unusual great service these days!!!

    R
    Ricky
    United States United States
    04/16/2022

    Best aftermarket hood I have seen

    This was the best aftermarket hood I have ever put on. Fitment was perfect.

    D
    Derrick
    United States United States